Pages

Showing posts with label 2.4 GHz. Show all posts
Showing posts with label 2.4 GHz. Show all posts

Monday, June 29, 2015

8 Significant FCC certification changes with dates you need to know


Mark your calendar, starting July 13th this year a number of changes are taking effect with respect to the FCC certification and approvals process for intentional and unintentional radiators. Below is a quick synopsis of the major changes along with the specified transition dates.

These changes will have a major impact on your certification planning going forward. If you have questions or need assistance with your wireless device certifications don't hesitate to contact Compatible Electronics, Inc.

  1. Rules discontinuing FCC acceptance of certification applications (all certification via TCB)
  2. Codified pre-grant approval procedure that TCBs will follow
  3. Additional clarification on TCB’s post-market surveillance responsibilities
  4. Specified steps to address TCB performance deficiencies
  5. Rules referencing TCB accreditation updated to newest versions.
  6. Require accreditation of all laboratories that test equipment for certification as well as DoC
  7. Rules referencing measurement standards updated to newest versions.
  8. OET gains greater flexibility and authority to address “minor technical issues” and ability to change approved standards to newer versions under § 0.241 Authority delegated. 

Transition Dates:

July 13th, 2015

  • FCC will no longer accept applications for equipment certification (Done through TCB)
  • FCC Will no longer accept applications for § 2.948 test site listings


Sept 15, 2015

  • A TCB shall be accredited to ISO/IEC 17065, guide 65 is deprecated. Accrediting bodies shall meet requirements of ISO/IEC 17011


July 13th, 2016

  • All § 2.948 listings remaining valid will expire. Labs may still submit test reports up to Oct. 13, 2016
  • Intentional radiator measurements subject to part 15 shall be made using ANSI 63.10-2013


October 13th, 2016 (the big one to remember!)

  • All Laboratories submitting test data for support of a certification application must be accredited. 


July 13th, 2018

  • Radiated measurement labs for 1 – 40 GHz shall comply with C63.4-2014 (CISPR 16-1-4:2010-04) site validation in accordance with clause 5.5.1a)1)
-----------------


For questions, testing or certification needs under the new rules, please contact Compatible Electronics, Inc.


Ref;
CFR Title 47 § 2.950 Transition periods
Federal Register Vol. 80 No. 113 June 12, 2015 

Friday, July 20, 2012

Class 1 Status of 2.4 GHz Wireless LAN in the EU

Class 2 Label sample EU R&TTE. Provided by;
Compatible Electronics, Inc..

Confirmed during a Radio and Telecommunications Terminal Equipment Compliance Association (R&TTE CA) meeting held in Vienna, May 2012, the French deviation has expired for the 2.4 GHz band making it a Class 1 band.

Till this point, the 2.4 GHz band has been considered Class 2 in the EU, that is, when importing your product, it must carry the number of a notified body and a special alert symbol in addition to the CE Mark, and you must notify member nations having restrictions, of your intention to place the product on the EU market. Additionally, the product literature would carry a warning of the restriction to “Indoor use only”.

While the notification requirements for the 2.4 GHz use have been eliminated for some time, the last item preventing the 2.4 GHz WLAN from being classified officially as a Class 1 R&TTE device went away on July 1st. The French deviation in the band restricting use of 2.4 GHz WLAN devices to “Indoor use only” has expired.

From July 1, 2012, 2.4 GHz WLAN devices no longer require the alert symbol or Notified Body number, so long as harmonized standards are applied in full to the conformance assessment.

For an explanation of what the class descriptor indicates, see this excerpt from the ETSI.org web site;

“Commission Decision 2000/299/EC defines how equipment is classified according to its use of radio spectrum. It defines two equipment classes as follows:

  • Class 1, which can be placed on the market and taken into service throughout the Community

  • Class 2, to which some Member States apply restrictions and which is required to carry an 'alert symbol'.”

Ref;

R&TTECA

ETSI.org

http://www.art-telecom.fr/

http://www.erodocdb.dk/Docs/doc98/official/pdf/REC7003E.PDF